Light polymerization units are for polymerization of light curig materials, e.a. Megatray light curing tray material, Megaseal UNIVERSAL sealing lacquer and other light curing materials in the UVA area.

 

technical datas:

power consumption: 27 W

main supply: 220 V / 50 Hz

fluorescence bulb: 2 x UV-light / 9 W

spectrum: 320 nm - 450 nm

polymerization Time: 5 minutes

 

 

 

Megalight ST

Light polymerization units are for polymerization of light curig materials, e.a. Megatray light curing tray material, Megaseal UNIVERSAL sealing lacquer and other light curing materials in the UVA area. The units are also with blue light lamps (spectrum 400-500 nm) available upon request. Megalight ST is an ideal unit for the use in dental technical laboratory. With 4 fluorescence lamps is an optimal light polymerization effect obtained. The large polymerization room makes the simultaneous curing up to 4 models possible.

 

technical datas:

power consumption: 60 W

main supply: 220 V / 50 Hz

fluorescence bulb: 4 x UV-light / 9 W

spectrum: 320 nm - 450 nm

polymerization Time: 5 minutes

 

Megalux CS

Halogen light unit for polymerization of light curing fil- ling material, e.a. C-Fill MH, N-Fill, P-Fill, Megafill MH and Megafill MF. The classic structure and the simple handling of the unit allows the universal chair side use.

 

technical datas

power consumption: 130 W

main supply: 220 V / 50 Hz

fluorescence bulb: 12 V / 75 W

spectrum: 400 nm - 500 nm (blue light)

polymerization time: 20 s / 40 s / continuous (Timer with 10 seconds signals)

 

 

 

 

 

Megalux E

Halogen light unit for polymerization of light curing filling material, e.a. C-Fill MH, N-Fill, P-Fill, Megafill MH and Megafill MF.

 

technical datas

power consumption: 130 W 220V/50Hz

main supply: 12 V / 75 W

fluorescence bulb: 400 nm - 500 nm (blue light)

spectrum: Start / Stop Function

polymerization time: 10 seconds signals

Megalux E plus

Halogen light unit for polymerization of light curing fil- ling material, e.a. N-Fill, C-Fill MH, Megefill MH and Megafill MF.

 

technical datas

power consumption: 130 W

main supply: 220V/50Hz

fluorescence bulb: 12 V / 75 W

spectrum: 400 nm - 500 nm (blue light)

polymerization time: Start / Stop / 20s / 40s / continuous (Timer with 10 seconds signals)

 

 

 

 

 

Halogen light unit for polymerization of light curing fil- ling material, e.a. C-Fill MH, N-Fill, P-Fill, Megafill MH and Megafill MF. With an additional soft start phase the polymerization of the materials is controlled and possible tension in the filling material avoided.

 

technical data:

power consumption: 140 W

main supply: 220V/50Hz

fluorescence bulb: 12 V / 75 W

spectrum: 400 nm - 500 nm (blue light)

polymerization time: 20s/40s/continuous/ softstart-mode (Timer with 10 seconds signals)

 

 

 

 

high-performance L.E.D. light curing unit
The Megalux LED unit is an innovative light polyme- risation unit that was designed with implementation of the most recent findings in L.E.D.- technology. By using high-performance LED`s as light source emit- ting in the blue light spectrum, the light polymerisati- on is rendered possible for almost all popular light curing dental materials, e.g. composite filling materials, adhesives, fissure sealants and light curing cements.

The light intensity of 1,200 mW/cm2 with standard focus optical fibre 8 mm (1,600 mW/cm2 with focus optical fibre 6 mm), the integrated soft start as well as the adjustable exposure times of 10 s and 20 s provide universal applicability of the unit in all fields of light curing filling therapy.
Owing to the built-in lithium-ion battery, cordless work is possible. The integrated high-performance fan- less cooling block permits silent operation and working without overload for several using minutes. The light intensity of the LED lamp can be checked by an interprated radiometer in the charging pod.

 

technical datas:

main supply: 100-240 V/ 50-60 Hz

light intensity: 1.200 mW/cm2 with standard focus-optical fibre 8 mm

working cycle with full battery: 1.600 mW/cm2 with standard focus-optical fibre 6 mm

optical fibres: 300 x 10 s focus-optical fibre 8 mm (standard) focus-optical fibre 6 mm (optional)

weight of hand piece: 170 g
 

 

 

 

High intensive halogen light unit for polymerization of light curing filling material with soft start function for the use in orthodontic, prevention and chair side. With the use of a turbo light tip the light intensity can be achieved over 1.200 mW / cm² . With an additional soft start phase the polymerization of the materials is controlled and possible tension in the filling material avoided. An orthodontic function with a 5 seconds pulse makes the use in the ortho- dontic field possible. A high light function with 30 seconds pulse is suitable for the prevention and bleaching. With the build-in Radiometer the light output of the lamp can be checked at any time.

 

technical datas:

power consumption: 140 W
main supply: 220 V / 50 Hz
fluorescence bulb: 12 V / 75 W
spectrum: 400 nm - 500 nm (blue light)
polymerization time: 12 s / 30 s / continuous with 5 / 10 s signal / softstart-mode
 

 

 

Halogen light unit for polymerization of light curing filling material, e.a. C-Fill MH, N-Fill, P-Fill, Megafill MH and Megafill MF. With an additional soft start phase the polymerization of the materials is controlled and possible tensi- on in the filling material avoided. With the build-in Radiometer the light output of the lamp can be checked at any time.

technical datas:

power consumption: 140 W
main supply: 220 V / 50 Hz
fluorescence bulb: 12 V / 75 W
spectrum: 400 nm - 500 nm (blue light)
polymerization time: 20 s / 40 s / continuous / softstart-mode (Timer with 10 seconds signals)
 

 
 

Direction for use